I. The installation and disassembly of the pile driver shall be carried out according to the procedures specified in the operation manual.
II. The track laying of the track type pile frame shall comply with the provisions of the operation manual.
III. the column guide rail of pile driver shall be lubricated as required.
IV. before operation, the piling machine shall run each mechanism without load to ensure normal operation.
V. the pile driver is not allowed to lift the pile at the side or drag the pile at a long distance. When lifting the pile at the front, the horizontal distance to the concrete prefabricated pile shall not be more than 4m, and to the steel pile shall not be more than 7m, and the collision between the pile and the column shall be prevented.
Vi. when the hammer is hoisted by the pile driver, the minimum distance between the highest point of the hammer and the top of the column shall ensure safety.
VII. The rail clamp shall be clamped when the track type pile driver lifts the pile.
VIII. When using two-way column, it can be lifted only after the column is turned in place and the column and the base bar are locked with locking pin.